Power On/Off; Video Recording - Wiseup T183 Manual Del Usuario

All manuals and user guides at all-guides.com
>> Please make sure the Micro SD card (4GB-32GB, format it for the first usage) is
securely fitted into the camera's SD card slot. The camera will not work without a
Micro SD card. A SDHC Class 10 Micro SD card is recommended.
>> Please slide the power switch to the ON position.
>> Aim the remote controller at the camera every time you press a button.
>> The blue indicator light on the remote controller will flash once every time you
press a button.
[Note]:
If no Micro SD card is fitted into the camera, the red indicator light will flash eight times and
then turn off

3.1. POWER ON/OFF

3.1.1. Power on the camera by holding down Button A for 3 seconds. The red indicator
light will flash once and then stay illuminated, indicating the camera has entered into
standby mode automatically.
3.1.2. Power off the camera by pressing Button A once. The red indicator light will flash
three times and turn off. Slide the power switch to the OFF position.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 2 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by holding down Button A for 3 seconds. The red indicator
light will flash once and then stay illuminated, indicating the camera has entered into
standby mode automatically.
3.2.2. Press Button C once to record video. The red indicator light will flash three times
and then turn off.
3.2.3. Press Button C once again to stop recording video. The red indicator light will
stay illuminated, indicating the camera is back to standby mode.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). The camera can record video for 13 hours continuously on a full charge.
3). Video Resolution: 1280×960 Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by holding down Button A for 3 seconds. The red indicator
light will flash once and then stay illuminated, indicating the camera has entered into
standby mode automatically.