Power On/Off; Video Recording - Wiseup L400 Guia Del Usuario

>> Please make sure the Micro SD card has been formatted already and is securely fitted into
the camera's SD card slot, or it will not work. We recommend you use a SDHC Class 10 Micro
SD card.
>> This product is a fully functional electronic lighter. In order to avoid the dangers of overheat-
ing, don't allow the lighter to burn continuously for more than two minutes.
>> If the lighter camera stops working or doesn't work properly, switch on the lighter once and
the camera will reboot automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 1 second. Both blue and red indi-
cator lights will come on and the camera will vibrate once. Then the blue one will turn off and
the red one will remain solid, indicating the camera has entered into standby mode automatical-
ly.
3.1.2. Power off the camera by pressing the Power Button for 1 second again in standby mode.
The camera will vibrate once, and both blue and red indicator lights will come on for 1 second
and then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 1 second. Both blue and red indi-
cator lights will come on and the camera will vibrate once. Then the blue one will turn off and
the red one will remain solid, indicating the camera has entered into standby mode automatical-
ly.
3.2.2. Press the Power Button once to record video. The red indicator light will flash twice and
the camera will vibrate twice.
3.2.3. Press the Power Button once again to stop recording video. The red indicator light will
come on and remain solid.
[Note]:
1). A video clip will be generated and saved every 3 minutes automatically.
2).The camera can record video for 3.5 hours continuously on a full charge.
3).Video Resolution: 1920x1080P Video Format: AVI
4). Each video clip will take up 354M-400MB storage space of the Micro SD card.
5). Loop recording is supported.
IV. Video File Uploads
4.1. Power off the camera and insert it into a proper PC computer USB port.