Wiseup T183 Manual Del Usuario página 3

All manuals and user guides at all-guides.com
3.3.2. Press Button B once to take a photo. The red indicator light will flash once and
then stay illuminated, indicating the camera is back to standby mode.
3.4. MOTION DETECTION RECORDING
3.4.1. Power on the camera by holding down Button A for 3 seconds. The red indicator
light will flash once and then stay illuminated, indicating the camera has entered into
standby mode automatically.
3.4.2. Press Button D once to enter into motion detection recording mode. The red
indicator light will flash six times and turn off.
3.4.3. When a movement is detected, the red indicator light will flash once and the
camera will start recording video automatically.
3.4.4. Press Button D once again to exit motion detection recording mode. The red
indicator light will stay illuminated, indicating the camera is back to standby mode.
IV. Video/Image File Uploads
4.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting the Date/Time Stamp
5.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
Year-Month-Day Hour:Minute:Second. (For example: 2016-04-12 14:24:32). Save this
file.
5.6. Restart the camera and the system will upgrade the program automatically
VI. Charging
6.1. Connect the camera to an outlet AC power socket by using the USB cable and
DC 5V charging adapter provided.