Battery Replacement; Troubleshooting - TFA 35.1150 Instrucciones De Uso

TFA_No. 35.1150_Anleitung 21.09.2018
SEASON – Wireless weather station
• The outdoor transmitter can be placed onto any flat surface or wall mounted at a chosen location by the mounting hole
found at the back of the unit. When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may
trigger incorrect measurement and continuous humidity damages the electronic components needlessly.
• Once the desired location is chosen, check whether the transmission from the device to the base station is possible (trans-
mission range of up to 80 m in open areas). Within solid walls, especially ones with metal parts, the transmission range
can be reduced considerably.
• If necessary choose another position for the outdoor transmitter and/or base station.
15. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries and unplug the power adapter from the mains socket if the device will not be used for a long period
of time.

15.1 Battery replacement

• Change the outdoor transmitter's batteries when the battery symbol appears on the outdoor values display.
• Change the base station batteries when the battery symbol appears on the indoor values display.
• Please note: When the batteries are changed, the contact between the outdoor transmitter and the base station must be
restored – so always insert new batteries into both devices or start a manual transmitter search.

16. Troubleshooting

Problem Solution
No indication Operation with power adapter:
➜ Connect the base station to the power adapter
on the base station
➜ Press the LIGHT button to activate the backlight
➜ Check the power adapter
Battery operation:
➜ Ensure the batteries' polarities are correct
➜ Press any button to activate the backlight briefly
➜ Change the batteries
30
10:15 Uhr Seite 16
SEASON – Wireless weather station
➜ No outdoor transmitter is installed
No reception
➜ Check the outdoor transmitter's batteries (do not use rechargeable batteries!)
of the outdoor transmitter
➜ Restart the transmitter and the base station according to the manual
Display "---"
➜ Start the outdoor transmitter manual search according to the instruction manual
➜ Choose another place for the outdoor transmitter and/or the base station
➜ Reduce the distance between the outdoor transmitter and the base station
➜ Check if there is any source of interference
➜ Change the batteries
Incorrect indication
➜ Factory reset: To reset to factory setting, hold the ALERTS and LIGHT button on the base
station for five seconds at the same time. All settings will be deleted.
➜ Outside measuring range
Display HI LO
18. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-
of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to
ensure environmentally-compatible disposal.
19. Specifications
Measuring range indoor
Temperature 0 °C... +37 °C (+32...+99 °F)
Humidity 10 %rH...99 %rH
31