Operate The 5000N; Power On The 5000N; Power Off The 5000N - Rimage Professional 5100N Manual De Instrucciones

All manuals and user guides at all-guides.com

Operate the 5000N

Power On the 5000N

1. Be sure that the power switch on the
back of the unit is in the On position.
2. On the front of the autoloader, press
the embedded PC power button to
power on the 5000N.
When the 5000N completes the
initialization, the operator panel
displays [RIMAGE 5000N READY].

Note: Initializing the 5000N can
take up to 5 minutes.
Front View

Power Off the 5000N

1. Close all open software applications or projects.
2. Briefly press the embedded PC power button to shut down Windows and
the embedded PC.

Caution: Do not press and hold the embedded PC power button. If you
press and hold the PC power button, the embedded PC will not shut
down properly. This may cause data loss or corruption.

Note: Powering off the 5000N takes approximately 30 seconds.
2000447_C
Operate the 5000N
Embedded
PC Power
Button
Back View
Power
Switch
13