Noise And Vibration Information - Hilti DX 6 Manual De Instrucciones

Weight
Length (fastening tool)
Length (fastener)
Recommended maximum fastening
rate
Required contact pressure
Compression stroke
Ambient temperature (storage and
use)
Weight
Length (fastening tool)
Length (fastener)
Recommended maximum fastening
rate
Required contact pressure
Compression stroke
Ambient temperature (storage and
use)
4.1 Bluetooth
Frequency
Maximum emitted transmission power
4.2

Noise and vibration information

The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and can be used to compare fastening tools with each other. They can also be used
for a preliminary assessment of exposure. The data given represent the main applications of the fastening
tool. However, if the fastening tool is used for different applications, with different accessories or is poorly
maintained, the data may vary. This can significantly increase exposure over the total working period. An
estimation of the level of exposure should also take into account the periods of time when the fastening
tool is not actually in use. This can significantly reduce exposure over the total working period. Prescribe
additional safety measures to protect the operator from the effects of noise and/or vibration, such as:
Maintenance of the fastening tool and its additional equipment or accessories, keeping the operator's hands
warm, organization of work procedures.
The noise values listed were determined under the following conditions:
Noise information conditions
Cartridge
Energy setting
Application
Noise information in accordance with EN 15895
Sound power level (L
WA
Emission sound pressure level (L
Peak sound pressure emission level (L
Vibration information in accordance with EN 2006/42/EG
Vibration emission
26 English
DX 6-F8
3.37 kg
475 mm
13 mm ... 72 mm
700 rev/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
DX 6 IE-L
3.43 kg
547 mm
20 mm ... 140 mm
700 rev/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
6.8/11 caliber, black
6
Fastening 24 mm wood to concrete (C40) with X-P47 P8
)
)
pA
)
pCpeak
DX 6-F10 DX 6-MX
3.38 kg 3.63 kg
475 mm 485 mm
13 mm ... 72 mm 13 mm ... 72 mm
700 rev/h 700 rev/h
174 N ... 200 N 174 N ... 200 N
19 mm 19 mm
−15 ℃ ... 50 ℃ −15 ℃ ... 50 ℃
DX 6 IE-XL
3.48 kg
607 mm
20 mm ... 200 mm
700 rev/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
2,400 MHz ... 2,483.5 MHz
−27.2 dBm
106 ±2 dB
103 ±2 dB
134 ±2 dB
< 2.5 m/s²
2232121
*2232121*