Tips And Recommendations For Installation - SOMFY Sonesse Ultra 50 Manual Del Usuario

EN
Setting the lower end limit
V
1) Press the button on the control point to lower the
motorised product to the lower end limit.
2) Press the Stop button on the control point when the
motorised product reaches the desired lower end limit.
•
•
The end limits are set.

2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1. Questions about the Sonesse Ultra 50?
The motorised
product does not
operate.
The motorised
The motorised
product stop to soon
or to late.
54
Images not contractually binding
Possible causes
The wiring is incorrect.
The motor is in thermal protection. Wait until the motor cools down.
The control point is not compatible.
The motorised product is
compressed between the brackets
screws.
1)
2)
necessary.
Replace
Increase the play between the brackets
Clean the roller tube.
Readjust the end-limits
Copyright © 2014 -2017 Somfy SAS. All rights reserved.
Solutions