Commissioning; Tips And Recommendations For Installation - SOMFY Sonesse Ultra 50 RS485 Serie Manual

EN

2.3. COMMISSIONING

To set the motor, use the RS485 SETTING
Connect the RS485 SETTING TOOL to the motor
SETTING TOOL (P 92).

2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1. Questions about the Sonesse Ultra 50 RS485?
The motorised
product does not
operate.
The motorised
The motorised
product stop to soon
or to late.
54
Images not contractually binding
Possible causes
The wiring is incorrect.
The motor is in thermal
protection.
An incorrect Data cable has been
used.
The motorised product is com-
pressed between the brackets
screws.
necessary.
Wait until the motor cools down.
Check the Data cable
Replace
Increase the play between the brackets
Clean the roller tube.
Readjust the end-limits
Copyright © 2015 - 2017 Somfy SAS. All rights reserved.
Solutions