Operating The Appliance; Switching On Or Off; Setting The Temperature; Warming Setting - Bosch PKY475FB1E Instrucciones De Uso

Operating the appliance

en
1Operating the appliance
In this section, you can find out how to set your
p l i a n c e O p e r a t i n g t h e a p
appliance. In the table, you can find the settings for
various dishes.

Switching on or off

The appliance switches off automatically when
Note:
the temperature setting remains at 0 for more than
20 seconds.
Switching on
Touch the symbol.
#
An audible signal sounds. The indicator above the main
switch lights up. The appliance is ready to use.
Switching off
Touch the symbol until the indicator above the main
#
switch goes out.
The appliance is switched off. The residual heat
indicator remains lit until the appliance has cooled
down sufficiently.

Setting the temperature

Switch on the appliance with the main switch.
1.
lights up on the temperature display.
‹‹‹
Set the required temperature using the buttons.
2.
The heating indicator flashes.
Once the set temperature has been reached, an audible
signal sounds and the heating indicator goes out. Now
you can place the food onto the teppanyaki.
The appliance regulates the temperature by
Note:
switching the heat on and off. The heat may switch on
and off even at the highest setting.

Warming setting

The teppanyaki must be switched on.
Select the warming setting in the control panel.
e
Do not attempt to keep excessively large quantities of
food warm. All food that is to be kept warm should be in
contact with the frying surface, otherwise it will cool
down. Do not keep food warm for too long, otherwise it
will become dry.
8

Cleaning level

At the cleaning setting, the appliance heats to 40
‚
°C. This enables you to leave the dirt to soak once you
have poured a little water and added a drop of washing-
up liquid on the frying surface (1 hour maximum). You
can begin cleaning once the dirt has begun to soften.

Switching off the rear heating zone

If you are preparing small amounts of food, you can
also just use the front heating zone. You can use the
rear heating zone for keeping food warm.
Switch on the appliance.
1.
Touch the symbol.
ƒ
2.
The display above the symbol lights up. The rear
heating zone is switched off.
The next time you switch the appliance on, this
Note:
setting will be retained. You can change this behaviour
in the basic settings.