Functional Description; Intended Use; Product Features - Bosch GBH 2600 Professional Manual Original

All manuals and user guides at all-guides.com
OBJ_DOKU-18231-001.fm Page 18 Tuesday, June 9, 2009 11:14 AM
18 | English
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone, as well as for light
chiselling work. It is also suitable for drilling
without impact in wood, metal, ceramic and
plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving.
1 619 929 854 | (9/6/09)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Quick change keyless chuck
2 SDS-plus quick change chuck
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
7 Rotational direction switch
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
11 Mode selector switch
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle
15 Drill chuck mounting
16 Front sleeve of the quick change keyless
chuck
17 Retaining ring of the quick change keyless
chuck
18 Extraction sleeve of the dust extraction
attachment*
19 Clamping screw for the dust extraction
attachment*
20 Depth stop of the dust extraction attach-
ment*
21 Telescopic pipe of the dust extraction
attachment*
22 Wing bolt of the dust extraction
attachment*
23 Guide pipe of the dust extraction
attachment*
24 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools