Connecting the Units
Connecting the power cord (1)
IP-BUS input
(Blue)
Multi-CD player
(sold separately)
Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the
cellular telephone. If not, keep the Audio Mute lead free of any connections.
Yellow
To terminal always supplied with
power regardless of ignition
switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
3
All manuals and user guides at all-guides.com
Refer to page 8.
11 cm
Antenna jack
IP-BUS cable
Lightgreen
Refer to page 5.
Violet/white
Fuse holder
Fuse resistor
Fuse resistor
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
23 cm
This product
40 cm
AV-BUS input
Fuse resistor
15 cm
Blue/white
To system control
terminal of the power
amp or Auto-antenna a
relay control terminal
(max. 300 mA 12 V DC)
Front speaker
Front speaker
Left
Rear speaker
Rear speaker
Subwoofer