Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9
RECORDING
(1) Starting Recording
2.3
2
8
6
PLAY
e
ON / STANDBY
CD SRS
REC
DOLBY NR
CD SRS
REC
0
PLAY
1
ON
REVERSE
OFF
MODE
CASSETTE DECK DRR-F101
1
5
7
4
ON / STANDBY
1
Turn on the power.
Load the cassette tape onto which
you want to record.
2
Load the cassette tape with side A
facing up.
Refer to page 7.
3
Close the cassette holder.
Set the reverse mode.
4
REVERSE
Refer to page 7.
MODE
(2) Stopping Recording
1
PLAY
e
ON / STANDBY
CD SRS
REC
DOLBY NR
CD SRS
REC
0
PLAY
1
ON
REVERSE
OFF
MODE
CASSETTE DECK DRR-F101
DOLBY NR
5
Set the Dolby NR mode.
Press the recording button.
6
REC
• The recording pause mode is set.
Set the DRR-F101's play direction
7
indicator (
or
) to the direction in
0
1
which you want to record.
PLAY
Press the play button (PLAY).
8
• Recording starts
Start playing the track on the CD player or MD
9
recorder.
During recording, press the stop
1
button.
• Playback stops.
NOTE:
• Be sure to press the stop button (
) to stop
2
recording before turning off the power or
unplugging the power cord.
10
SYSTEM FUNCTIONS
Operation is even easier when the components in the D-F101 series are connected to the DRR-F101 with system
2
connections. (For instructions on connections, refer to "CONNECTIONS" on page 5 and refer to the respective
operating instructions of receiver (DRA-F101).)
The system functions will only work when the components of the D-F101 series are connected. They will not work
2
with other components. To use the system functions, connect the receiver (DRA-F101).
(1) System Remote Control
When the DRR-F101 is used in a system with the D-F101 series, it can be operated with the system remote control
2
unit (RC-927) included with the receiver (DRA-F101).
When system connections are made, all the remote control signals are received at the DRA-F101's remote sensor.
2
The buttons on the remote control unit function in the same way as the corresponding buttons on the set. (Refer to
2
"PART NAMES AND FUNCTIONS" on page 6.)
ON
OFF
For instructions on operating the receiver (DRA-F101) and CD player (DCD-F101) and MD player (DMD-F101), refer to
2
the respective operating instructions.
The system function signals for operating the components in the D-F101 series are all output from the receiver (DRA-
2
F101). Thus, when making system connections, be sure to connect the receiver (DRA-F101).
Names of remote control unit buttons (cassette deck section)
2
Power standby button
(SYSTEM POWER STANDBY)
Press this to set the system's
power to the standby mode.
(This button cannot be used to
set the DRR-F101's power
individually to the standby
mode.)
Play button (
1
)
Stop button (
2
)
Direction selector
button (
)
0 1
OFF
ON
SYSTEM
Power on button (SYSTEM
Power on button
POWER
(SYSTEM POWER ON)
POWER ON)
Press this to turn on the
PROG /
DIRECT
system's power.
1
2
3
(This button cannot be used to
CALL
turn on only the DRR-F101's
4
5
6
power.)
CLEAR
7
8
9
RANDOM
REPEAT
10
+10
CD SRS
TAPE
MD
TIME EDIT
CD synchronized recording
TIME/
DIMMER
PANEL
button (CD SRS TAPE)
RDS
BAND
TUNING
Fast-forward button (
STOP
PLAY
VOLUME
/SELECT
Rewind button (
PRESET
+
-
TAPE
SLEEP
FUNCTION
MODE
CD
TUNER
MD
TAPE
Function selector switch
Use this to select which
function to operate with the
remote control unit. Set the
switch to "TAPE" to operate
the DRR-F101.
RC-927
REMOTE CONTROL UNIT
ENGLISH
7
)
6
)
9
Publicidad
Capítulos
Tabla de contenido
