Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
28. Remove the igniter cap by turning it
counterclockwise. Insert the AA battery (L) into
the igniter body with positive (+) end facing out.
Replace the igniter cap.
29. Open the cart doors and slide the tank shelf (Z)
out of the cart, and insert the LP gas cylinder
(sold separately) into the nesting hole located in
the tank shelf (Z). Tighten the tank screw until the
cylinder is secure inside the nesting hole of the
tank shelf (Z).
30. Push the tank shelf (Z) back into the cart and
secure it by twisting the locking tab. Hand-tighten
the hose/regulator coupling to the threaded valve
of the LP gas cylinder.
All manuals and user guides at all-guides.com
17
28
L
29
30
2
Z
Z
Publicidad
Tabla de contenido
