Battery Charge Indicator - Braun VitalScan 1 Manual Del Usuario

Deleting all measurements
All manuals and user guides at all-guides.com
IMPORTANT:
to make reference to the readings in the future.
1
7 Sec.
3.
7 Sec.
3.
1. In shut off mode, press
in display.
2. When you release the
3. Press the
disappear which indicates all stored readings have been deleted.

Battery charge indicator

Batteries almost discharged
When the batteries are approximately 75% used the
battery symbol will flash. The monitor will continue to
measure reliably, but new batteries should be obtained.
Batteries discharged—replacements required
!
When the batteries are dead, the battery symbol
will flash empty, display will go blank and 3 beeps will
sound. You cannot take any further measurements
and must replace the batteries.
Before proceeding to clear all the memory, make sure you don't have
2
button for at least 7 seconds until CL appears
button, CL will flash.
button one more time and 3 short beeps will sound, CL will
3
!
9