Memory Functions; Battery Life Indicator; Storage And Cleaning - Braun iCheck 7 BPW 4500 Manual De Instrucciones

The instant read colour indicator follows the ESH and WHO recommendations for interpreting
readings and is described in the table below.
Green: normal blood
Your blood pressure reading is normal, and values are below
pressure 135 mmHg systolic and below 85 mmHg diastolic.
Your blood pressure reading is in the mild hypertension range
Yellow: mild
with values between 135-159 mmHg systolic and/or 85-99 mmHg
hypertension
diastolic.
Your blood pressure reading is in the moderate hypertension range
Orange: moderate
with values between 160-179 mmHg systolic and/or
hypertension
100-109 mmHg diastolic.
Your blood pressure reading is in the severe hypertension range
with values of 180 mmHg systolic and above and/or 110 mmHg
Red: severe hypertension
diastolic and above. If you constently get readings in this range,
consult your doctor.
Blood pressure readings will be automatically saved in the device memory. Results are displayed
for approx. 60 seconds, then device will automatically shut-off. You can also shut off your device
with On/Off button.
Note: If your iCheck® 7 device is switched on within 60 seconds of powering off, the welcome
screen is bypassed.

Memory functions

Your iCheck® 7 will store up to 100 readings in the internal memory. Readings are stored
automatically when the measurement is complete. When the 100 readings are reached, the new
readings automatically replace the oldest ones. We suggest you regularly transfer your stored
readings onto the Braun Healthy Heart app on your Smartphone in order to follow the evolution
of your blood pressure easily over a long period of time.
The memory is non-volatile. Stored readings will not be lost when the batteries are replaced.
6
Connection to Smartphone and Braun Healthy Heart app
Your iCheck® 7 can be connected by Bluetooth® to your smartphone (iOS and Android) to
download stored readings automatically. When readings are downloaded to your Smartphone,
they are deleted from your iCheck® 7 memory.
Make sure the 'Braun Healthy Heart' app has been downloaded onto your Smartphone and the
app is open.
Switch on the Bluetooth function on your smartphone. If you are using the app for the first time,
it will guide you in pairing your iCheck® 7. If you have already used the app before, go to the
"Connect device" function available in the app menu and follow the instructions.
During Bluetooth pairing, iCheck® 7 will show a flashing Bluetooth icon
Once pairing is complete, iCheck® 7 will show your name on the display.

Battery life indicator

Batteries are low
When the batteries are approximately 80% discharged, the low battery symbol will show at
power-up for about 6 seconds. The iCheck® 7 device will continue to measure reliably, but new
batteries should be obtained.
Batteries are empty —replacements required
When the batteries are fully discharged, the empty battery symbol will show at power-up for
about 6 seconds and then device will automatically shut off. You cannot take any readings and
must replace the batteries.

Storage and cleaning

• Do not place/leave the item in direct sunlight, at high temperatures or in damp and dusty places.
• Do not store at extremely low (less than -20 °C) or high (more than 55 °C) temperatures.
• Use a wet cloth or one impregnated with a mild cleansing agent to clean the case and then use
a dry cloth to wipe it dry.
• Do not use any strong cleansers to clean it.
English
on the display.
7