3�2 Quick Start - ECOVACS DEEBOT N79 Manual De Instrucciones

3. Operating and Programming
3.2 Quick Start
1 Charging Dock Placement
■
Connect the Power Adapter to the Charging Dock�
■
Place the Charging Dock on a level floor surface against the wall with the base perpendicular
to the ground� Keep the immediate area 2m (6�6') in front of the charger and 1 m (3�3') on both
sides of the charger clear of objects and reflective surfaces.
■
Plug the Charging Dock in� The Power Indicator Light on the Charging Dock glows�
Install Side Brushes
2
■
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each
slot until it clicks�
Power ON
3
■
Turn the robot's Side Power Switch to
the ON position� "l" indicates ON and
"O" indicates OFF� DEEBOT is powered
ON when
BLUE�
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead
of powered OFF�
10
EN
button glows a continuous