YESOUL E30S Manual De Instrucciones Del Producto página 7

Installation Guide
STEP 4: Installation of front bottom tube assembly
1. Find the front bottom tube assembly (3) and 2 hexagon socket head bolts (19).
2. Put one styrofoam pad (A) under the front end of the underframe. Remove the round paper
tube (B) and two hexagon socket head bolts (C) that are locked in advance on the underframe
assembly (1), and keep them aside (they will not be used later).
3. Put the front bottom tube assembly (3) close to the arc-shaped sheet metal on the underframe
assembly (1), and align the holes. Install the two hexagon socket head bolts (19) through the
holes of the front bottom tube assembly (3). Lock the front bottom tube assembly (3) onto the
underframe assembly (1) (as shown in the figure below).
Installation tool