Faema TEOREMA A Uso Y Instalación página 59

Pressing the "PRG" key (
appear on the display:
time
time
Day off
Energy Saving
(enable/disable the Energy Saving function:
(start time for evening beverage price: only when
(end time for evening beverage price: only when
3 (hour of scheduled washes from 2 to 5)
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time 22:00
OFF time 22:00)
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
To modify the date and hour, press the
the corresponding line. The following message will appear:
ear
onth
ate
our
inutes
), the following message will
+
03:00
03:00
none
YES
"PRG" key ( )on
+
12
09
26
17
12
Washing cycles can be performed at pre-set times. At the set
time, the display will show: this message "EXECUTE COFFEE
WASHING".
When requested, a washing cycle (simultaneous or sequential)
will be performed as described in the "Cleaning Operations"
paragraph.
Follow these steps to set the time for the washing cycle:
•
• Press the "PRG" key (
• Change the time, using the
• Press the "RES" key (
Repeat the steps previously indicated to modify the washing
times.
: wash 1 cannot be disabled. It is requested daily at
the programmed hour, and always within 24 hours.
: if the set hour for these wash cycles occurs
when the machine is switched off, the request will be canceled.
Set OFF against the time so as to not activate these wash cycles.
OFF is displayed press the
is "00:00".
For more details, please consult the technical manual at the
Use the "+" ( ) and
key ( ). The cursor will turn into an arrow è and it becomes
possible to change the number for the selected entry by using
the "+" ( ) and " " (
Once the operation is completed, press the
Note: the cursor changes back to black line.
Repeat the operation described above to modify other para-
meters.
23 EN
WASH
"+" ( ) and " " (
.
" " ( ) key the indicated time
" " ( ) keys to move the cursor
"PRG"
) keys.
"RES" key ( )