Care and Maintenance
Cleaning Your Indoor Unit
BEFORE CLEANING OR
MAINTENANCE
ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.
CAUTION
Only use a soft, dry cloth to wipe the unit clean.
If the unit is especially dirty, you can use a cloth
soaked in warm water to wipe it clean.
Do not use chemicals or chemically treated
•
cloths to clean the unit
Do not use benzene, paint thinner,
•
polishing powder or other solvents to clean
the unit. They can cause the plastic surface
to crack or deform.
Do not use water hotter than 40°C (104°F)
•
to clean the front panel. This can cause the
panel to deform or become discolored.
Cleaning Your Air Filter
A clogged air conditioner can reduce the cooling
efficiency of your unit, and can also be bad for
your health. Make sure to clean the filter once
every two weeks.
WARNING: DO NOT REMOVE OR
CLEAN THE FILTER BY YOURSELF
Removing and cleaning the filter can be
dangerous. Removal and maintenance must be
performed by a certified technician.
Cleaning the dust lter located at the bottom of
the unit:
Seize the left and right at the bottom of the
1.
strainer mesh put his hand to pull, remove
the strainer mesh.Place the strainer mesh
clean, dry in the shade.Packed strainer mesh .
2.
Remove the air lter.
Clean the air lter by vacuuming the surface
3.
or washing it in warm water with mild
detergent.
Rinse the lter with clean water and allow
4.
it to air-dry. DO NOT let the lter dry in
direct sunlight.
Reinstall the lter.
5.
If using water, the inlet side
should face down and away
from the water stream.
If using a vacuum cleaner,
the inlet side should face
the vacuum.
Page 13