Slow Cooking
1.
Follow steps in the "Cooking Preparation" section of this manual. The steam
release handle should be at the "Venting" positions. An optional glass lid can
also be used. 2.
2.
Connect power cord. The LED display shows. "OFF" indicating that it's in
standby state.
3.
Press "Slow Cook" key.
4.
Change cooking duration between and 6 hours by pressing the "+" or "-" key.
5.
Cooking starts automatically in 5 seconds after the last key is pressed (after
"da" one time)
6.
When the cooking finishes, the cooker beep one time and goes into the Auto
"Keep Warm" cycle for 24 hours.
Delayed Cooking with Timer
Your multicooker has a timer function to delay the start of all kinds of cooking for up
to 24 hours. The following shows how to program for delayed cooking.
1.
Follow steps in the previous. "Pressure Cooking" and "Slow Cooking"
sections to set a cooking program.
2.
Within 5 seconds after program selection, press the "Timer" key to set the
hours and minutes to be delayed. Use "+ " and "-" to set the delayed hours.
Press "Timer" key again to change the minutes. The time is the
delayed time before the program starts. Please allow sufficient cooking time
and cooling down time before serving.
- 17 -