BEFORE THE FIRST USE
Before the first use, please take out all accessories from the package and read this
manual carefully. Please pay particular attention to operational instructions and
cautions to avoid any injury or property damage. Please wash the inside of the lid
and the inner pot with warm soapy water, rinse and dry thoroughly. Wipe the outer
housing with a clean damp cloth. Never immerse the cooker housing in water or any
other liquid. The inner pot, sealing ring and steam release handle and all accessories
are dishwasher safe. But never clean the lid and housing in a dishwasher.
Install the Condensation Collector
To install the condensation collector, slide it into the slot on the cooker housing.
Follow the reverse order to remove it for cleaning.
Remove and Install the Sealing Ring
The sealing ring can be removed by pulling upwards (check the below picture and pull
up). To re-install the sealing ring, pressing it down into the lid rest (check the below
picture and press down). The sealing ring can be installed on either side facing up.
Please note the following:
•
Prior to each use, inspect to make sure the sealing ring is well seated in the
sealing ring rack. A properly seated sealing ring can be shifted, with a bit of
effort, clockwise or anti-clockwise follow the sealing ring rack shifted.
•
After use, remove any foreign objects from the sealing ring.
•
Keep the sealing ring clean to avoid odor. Washing the sealing ring in warm
soapy water or dishwasher can remove odor. However, it is normal for the
sealing ring to absorb the smell of certain acidic foods. That's why it is always
a good idea to have more than one sealing ring on hand.
•
Never pull the sealing ring by force, as the pulling may cause deformation and
affect its function in sealing the pressure.
•
A sealing ring with cracks, cuts or other damages should not be used. A new
sealing ring replacement should be used.
- 8 -