Tabla De Contenido; Table Of Specifi Cations; Technical Description - Gumotex Halibut Manual Del Usuario

Ocultar thumbs Ver también para Halibut:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
KAYAK
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasional
waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenan-
ce and control prior to your fi rst individual use of the vessel so that it
is safe and comfortable. Your dealer or the National Yacht Federation
or club will recommend you appropriate training courses or qualifi ed
instructors.
Do not pull o until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.

1. Table of Specifi cations

(indicative values)
Length (cm)
Width (cm)
Number of air chambers
Dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical Description - see Fig. 1
1.
Side tube
2. Bottom
3. PUSH/PUSH valve - enables infl ation/defl ation, pres-
sure control, and pressure measurement by a pressure
gauge
4. Relief valve
5. Manufacturer's label
6. Yellow "WARNING" label
7.
Seat board
8. Infl atable seat with fi shing rod mounts
9. Floor board
10. Bracket board
11. Mount for fi xing the seat and the bracket board
8
HALIBUT
Table of Contents:
0,02 MPa [0,2 Bar/3 PSI]
12. Board
13. Handle
14. Plastic handle
15. Safety rope
16. Safety rope tie-down
17. Baggage fi xture
18. Bungee netting
19. Flexible rope with snap hooks
20. Rope loop for anchor fastening
21. Anchor rope
22. Anchor rope fi xture with a D-ring
23. Rest fi xture (on the cylinder)
24. Drainage hole
25. Flexible rope for paddle fi xing
26. Flexible rope fi xture
VERSION 9/2021
GB
Page 8
375
96
3 + 1
70 × 46 × 30
21
200
1
15
55
8
9
9
9
10
10
10
10
10
10
11

Publicidad

Tabla de contenido
loading

Tabla de contenido