Buderus SU54/5 Instrucciones De Instalación Y De Mantenimiento página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Installation
Installing aquastat
▶ Remove cover from the aquastat. To do so, undo the screw on the top.
▶ If necessary, remove any unnecessary attachments. Attach bracket
[3] to aquastat [2] by means of two self-tapping screws [1].
Fig. 14 Attaching the aquastat to the bracket
[1]
Self-tapping screws
[2]
Aquastat
[3]
Bracket
▶ Feed the temperature sensor [4] with the compensating spring [3]
into the sensor well [5].
▶ Attach bracket [6] to DHW tank by means of 4 self-tapping sheet
metal screws [1].
▶ Replace the cover of the aquastat [2].
5
4
3
Fig. 15 Installing aquastat
[1]
Self-tapping screws
[2]
Aquastat
[3]
Compensating spring
[4]
Temperature sensor
[5]
Sensor Well
[6]
Bracket
12
6 720 800 155-03.1ITL
6
2
1
6 720 800 155-04.1ITL
Installing B-kit components
Fig. 16 Installing B-kit components
[1]
Tee 1" x 1" x ¾ " (2x) with P&T safety valve
[2]
Cap ¾ " for recirculation connection
[3]
Bracket with aquastat
[4]
Tee with fill and drain valve
SU54/5, SU80/5, SU100/5 – 6 720 808 532 (2013/08)
1
2
3
4
6 720 801 769-04.1ITL

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Su80/5Su100/5

Tabla de contenido