9. Press the CLOCK button to confirm your
settings.
10. Repeat steps 6 and 7 to set the minutes,
seconds
(day / month).
Note: The seconds can only be reset to
00.
11. Press the SET / RESET button to toggle
DST (ON/OFF).
12. Press the CLOCK button to confirm your
settings.
13. The LC display will then return to the
standard display.
Daylight saving time
The DST symbol
cates the clock is on daylight saving time.
The temperature station automatically detects
DST from the WWVB radio signal.
Setting the alarm
You can set two different alarm.
1. Press and hold the ALARM button
about 3 seconds.
Note: If an alarm has already been set,
the LC display will show the time the
alarm was set to. If not, the display shows
0:00 or AM 12:00.
2. The hour display flashes. Press the
SET / RESET button
value.
, year and date
5
in the LC display indi-
1
24
4
to set the desired
US-EN
for
20
21