Rec Pause/Start; Disc Direct Play - Sony AIWA JAX-S7 Instrucciones De Manejo

DISC DIRECT
PLAY 1-3
DISC CHANGE/
DISC SKIP
CD SYNC
REC PAUSE/
START
CD SYNC
You can automatically switch to recording tape from a CD.
1 Insert the recordable tape in deck B.
2 Load disc(s).
3 Select playback mode with MODE, MULTI JOG
and ENTER (see "Selecting playback mode").
•You cannot select Repeat playback or Shuffle playback.
4 Press CD SYNC.
CD function is automatically selected.
5 Press REC PAUSE/START to start recording.
EDIT
SHIFT
Deck B
Automatic CD dubbing
You can use your unit to automatically determine the best tape
length and rearrange track order for recording from a CD. The
order of tracks is changed so that no music is split from one
side to the other side of the tape.
1 Load a disc and select it to play by pressing a
DISC CHANGE/DISK SKIP.
2 Press SHIFT+EDIT on the remote.
The unit will read the CD then display what tape length is
necessary.
•Tape lengths displayed, in minutes, are: 10, 20, 30, 40,
46, 50, 54, 60, 64, 70, 80 and 90. If a tape longer than
90 minutes is needed "OVER 90" is displayed.
3 Insert the recordable tape in deck B.
4 Press CD SYNC.
5 Press REC PAUSE/START to begin recording.
To prevent accidental erasure
Remove the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
DISC SKIP
detection slot with adhesive tape.
En
21