When The Work Is Done; Disconnecting The Appliance; Storing And Transporting; Replacing The Dust Bag - Bosch BGL8 Serie Instrucciones De Uso

When the work is done

16
1
2 2
17
18
16 16

Disconnecting the appliance

16
Fig.
Pull out the mains plug.
Briefly pull on the power cord and release it (the
cable retracts automatically).

Storing and transporting

17
Fig.
To store or transport the appliance, you can use the
storage aid on the underside of the appliance.
Stand the appliance upright on its end. Slide the hook
on the floor nozzle into the recess on the underside of
the appliance.
!
Caution: Always switch off the appliance before
changing the filter.

Replacing the dust bag

18
Fig.
If the dust bag change indicator lights up continuous-
ly when the nozzle is lifted from the floor and the
highest power setting has been selected, the dust
bag must be changed, even though it may not yet be
full. In this case, it needs to be changed due to the
type of dust which has been vacuumed.
The nozzle, suction pipe and flexible hose must not
be blocked, even if this does not trigger the dust bag
change indicator.
en