Shelves And Bins - Fagor FQ8925X Manual De Instrucciones

About the shelves and bins.
Not all features are on all models.
Freezer tilt-out bin
Press tab and pull shelf forward
to remove
30
All manuals and user guides at all-guides.com
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer tilt-out
door bins are adjustable.
To remove: Lift the front of the bin straight up, then
lift up and out.
To replace or relocate: Engage the back side of
the bin in the molded supports of the door. Then
push down on the front of the bin. Bin will lock in
place.
Small Bins
To remove: Lift the front of the bin straight up then
out.
To replace: Position the bin above the rectangular
molded supports on the door. Then slide the bin
down onto the support to lock it in place.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to reach
items stored behind others. The special edges are
designed to help prevent spills from dripping to
lower shelves.
To remove:
Slide the shelf out until it reaches the stop, then
press down on the tab and slide the shelf straight
out.
To replace or relocate:
Line the shelf up with the supports and slide it into
place. The shelf can be repositioned when the door
is at 90° or more. To reposition the shelf, slide the
shelf past the stops and angle downward. Slide
shelf down to the desired position, line up with the
supports and slide into place.
Door Beverage Rack (on some models)
This rack holds up to 5 cans.
The rack hangs from the sides of the dairy bin.
To remove:
1. Empty the wine/beverage rack.
2. Holding the bottom of the dairy bin, lift the front
straight up, then lift up and out.
3. To detach the rack from the dairy bin, pull the
rack's side wires out of the holes on each side of
the dairy bin.
The snugger helps prevent tipping, spilling or slid-
ing of small items stored on the door shelf. Place a
finger on either side of the snugger near the rear
and move it back and forth to fit your needs.
Make sure you push the shelves all the way back
in before you close the door.
To replace:
1. Reattach the rack to the sides of the bin.
2. Engage the back side of the bin in the molded
supports on the door. Then push down on the
front of the bin. The bin will lock into place.