Suggested Radiant Element; Single Radiant Surface El; Settings - Bosch HES5053U Manual Del Uso Y Cuidado

Ocultar thumbs Ver también para HES5053U:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

outline pattern shown ( keep warm zone is only designed to
keep food warm). The dual radiant element is flexible
because you may set just the smaller inner portion as a
single element or both inner and outer portions can be set
to heat together.
Keep Warm Zone
Surface Control
(some models)
About the radiant surface elements
The element temperature rises gradually and evenly. As
the temperature rises, the element will glow red. To
maintain the selected setting the element will cycle ON and
OFF. The heating element retains enough heat to provi de a
uniform and consistent heat during the off cycle.
For efficient cooking, turn OFF the element several minutes
before cooking is complete. Th is will allow residual heat to
complete the cooking process.
Suggested radiant

settings

The suggested settings found in the following chart are
based on cooking with medium -weight aluminum pans with
lids. Settings may vary when using other types of pans.
English 16
All manuals and user guides at all-guides.com
Dual Radiant
Single Radiant
Surface Control
Surface Control
(some models)
surface element
Suggested settings for single and dual radiant
elements table.
Settings
High (HI - 9)
Medium high (7 - 8)
Medium (5 - 6)
Medium Low (2 - 4)
Low (LO - 1)
Single radiant surface elements
models)
To operate the single radiant element:
1. Place correctly sized cookware on single radiant
surface element.
2. Push in and turn the surface control knob in either
direction to the desired setting (See Suggested
settings for single and dual
Start most cooking operations on a higher setting and
then turn to a lower setting to finish cooking. The
surface control knobs do not have to be set exactly on
a particular spot. Use the graphics provided as a guide
and adjust the control knob as needed. Each surface
element provides a constant amount of heat at each
setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area.
3. When cooking is complete, turn the radiant surface
element OFF before remo ving the cookware.
Type of cooking
Start most foods, bring
water to a boil, pan broiling
Continue a rapid boil, fry,
deep fat fry
Maintain a slow boil,
thicken sauces and
gravies or steam
vegetables
Keep foods cooking,
poach, stew
Keep warm, melt, simmer
(all
radiant elements table ).

Publicidad

Tabla de contenido
loading

Tabla de contenido