Hansgrohe Axor Starck 107151 Serie Instrucciones De Montaje / Manejo / Garantía página 12

1
!
8a
!
8b
12
7
2
3
1
2
1
2
English
Massaud and Bouroullec only
(1) Install the safety set so that it is oriented as shown
in the diagram. Install the sleeve.
Install the escutcheon. Make sure that the notch is at
the bottom of the escutcheon.
(2) Install the handle adapter and screw. Tighten the
screw using a 3 mm Allen wrench.
(3) Install the handle so that the safety stop override
button is at the 12:00 position. Tighten the handle
screw using a 2 mm Allen wrench.
All other models
(1) Install the sleeve so that the indexing mark is at
the 12:00 position.
(2) Install the escutcheon. Make sure that the notch is
at the bottom of the plate.