Hansgrohe Axor Starck 107151 Serie Instrucciones De Montaje / Manejo / Garantía página 6

1
4 mm
3
2
1
3
6
2 4
1
3
1
2
4 mm
English
Flush the hot and cold supplies - one outlet
used
(1) Remove the dust cover.
(2) Open the cold stop using a 4 mm Allen wrench.
(3) Allow the cold supply to flush for at least five
minutes.
(4) Close the cold stop.
2
(1) Remove the flushing block using a 5 mm Allen
wrench. Turn it 90° and reinstall.
(2) Open the hot stop.
(3) Allow the hot supply to flush for at least 5 minutes.
(4) Close the hot stop.
2
Flush the hot and cold supplies - both outlets
used
(1) Remove the dust cover.
(2) Open both stops using a 4 mm Allen wrench.
(3) Allow the hot and cold supplies to flush for at
least 5 minutes.
(4) Close the stops.
1
2
4
4
4