Briggs & Stratton Snapper RPX210 Instrucciones De Instalación página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
5
+
+
16
STOP
+
If you need assistance with assembly of the unit, please
contact the web site or phone number shown in the Customer
Contact Guide (if provided) or the Operator's Manual.
WARNING
Failure to read and follow the safety warnings and
instructions in this document and in the operator's manual
could result in death, serious injury, and/or property
damage.
The warnings and instructions must be read, understood,
and followed when starting up, operating, servicing,
transporting, or storing the unit.
Remove the Shipping Crate
1
WARNING
Protect your eyes and hands when removing shipping
crate.
NOTICE:
The steering wheel maybe stored underneith the hood for
shipping.
2
Tools
3
Identify the Loose Components
4
Charge the Battery
WARNING
Explosion Hazard - Batteries produce explosive gases.
Corrosive Liquid Hazard - Batteries contain sulfuric
acid.
• Always wear safety glasses when working around
batteries.
• Keep all sparks, flames, and cigarettes away from
batteries at all times.
• Never lean over the battery when performing
maintenance.
• Never attempt to charge a frozen battery. Allow it to
warm to 60° F (15.5° C) before charging.
• Always leave vent caps in place to avoid explosions.
Lead Hazard - Battery posts, terminal and related
accessories contain lead and lead compounds. Wash
hands after handling.
NOTICE:
Voltage Spikes can damage the electronics. To avoid such
damage please follow these instructions carefully.

Publicidad

Tabla de contenido
loading

Tabla de contenido