Instructions For Use; Scope Of Delivery; Technical Data - MESTO 3585W Instrucciones De Uso

EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these

instructions for use.

Scope of delivery

Tank [1] with pump [2] and spare-parts pouch [3], instructions for use [4], hose [5], pump
holder [6] (Fig. 1)

Technical data

Device
Max. filling amount
Total contents
Max. operating pressure
Max. operating tempera¬ture
Weight when empty/Gross weight max.
Material of tank
Technical residual quantity
Table 1
Assembly
1. Screw the hose [5] tightly into the outlet port [7]. (Fig. 2)
+
Note the location of the spigot [8] in order to be able to insert the lock.
2. Insert the lock [9]. (Fig. 2)
► The lock closes and the hose is secured from unscrewing out of the tank.
Checks
Visual inspection:
+
Pay special attention to the connections between the tank – hose and to the condition
of the pump thread and hose.
No leaks: Pump up the empty device to 2 bar.
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function: Pull the red button on the safety valve [10]. (Fig. 3)
► The pressure must dissipate.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Steel with polyester coating
Are tank [1], pump [2] and hose [5] undamaged? (Fig. 1)
14
3585W
10 l
13 l
6 bar
50 °C
5.2 / 15.2 kg
0.03 l
ENGLISH
3615W
10 l
13 l
4.7 / 14.7 kg
Stainless steel