Main Functions; Introduction - Farfisa PDX2000 Manual Del Usuario

Introduction

Switchboard PDX2000 is a component of the Digital
System "DUO" and comes with a table adaptor and junction
box for an easy connection to the installation. Equipped
with an alphanumerical keypad, a LCD display and 7
service buttons suitable for making all the functions.The
switchboard can communicate with 19800 users (intercoms
or videointercoms) and with one or more door stations.
14
15
16
17
Features (see figure)
1 - Button "hold". During the conversation with an
internal user or a door station, pressing it, it is
possible to hold the conversation in progress and
then resume it by pressing again the same button.
The user in hold is flashing on the display.
2 - Button "ON-OFF". It allows to power ON and OFF
the switchboard (function day-night).
3 - Button "connect". It allows to put in communi-
cation 2 internal users or a door station with an
internal user.
4 - Button "door opener". It allows to release the lock
of the door station in conversation at the moment
or that of the last door station from which a call
has been made.
5 - Button "monitor". It allows to control a door sta-
tion quickly connecting to it (or, in case of multiple
entrances, to the last door station from which a
call has been made).
6 - Button "menu". This button allows to access all
the functions and programmings. To move inside
the submenus use the arrow buttons.
7 - Arrow up (or back).
8 - Arrow down (or forward).
9 - Button "erase". It allows to erase a character or
- 16 - Mi 2453/2

Main functions

- Three operating modes: day, night and direct call
- Communication between internal users or internal users
and door stations
- Monitor of one or more door stations
- Inclusion on a busy user
- Booking of calls
- Selective door lock release
- Users directory, also with "alias"
- Alarm management
- automatic determination of MASTER/SLAVE setting in
the case of several switchboards with the same address
A D
1 2 3
B E
C F
G J M
4 5 6
H K N
I L O
P W
T
7 8 9
Q X
U
R Y
V
S
Z
0
a selection during settings or insertion of names.
10 - Button "enter". It allows to confirm and proceed
to the next entry.
11 - During the normal operations of the switchboard
it allows to operate the internal relay. During the
input of data this button is used to select the type
of character (upper or lower case, numbers, etc.).
12 - Alphanumerical Keypad.
13 - Button "inclusion". It allows the switchboard
operator to include during a communication in
progress.
14 - Button "reset". Press this button to restart the
switchboard. During the reset no data will be
lost.
15 - LCD Display. It shows data and functions during
the operation of the switchboard or during the
programming.
16 - LED's to highlight the most important functions
of the switchboard.
17 - Memory card socket. Using a memory card with a
maximum capacity of 2 GB, it is possible to import
or export data and update the product software
with more recent releases that must be requested
to Farfisa technical service.
1
2
3
4
5
6
7
8
9
10
11
12
13