Attention! If you disable the VOX feature, you will be able to answer incoming phone calls
only by pressing the "Forward" button.
Wired connection always in background
This feature let you keep the wired connection always on, even when the phone or the
intercom is open (but not when you are in FM radio mode). By default the Background
feature is ON.
Disabling:
› Enter the "Setup" mode:
› Turn off the unit
› Press and hold down the "Middle" button 7 sec., until the Red light is on permanently.
› Press the "Forward" and "Middle" button together for 3 seconds. The blue LED will
flash three times.
› Double click on the "Middle" button to exit the "Setup" mode and use the Midland
BTX2 PRO
Enabling:
Follow the same procedure up described; now the blue LED will flash once.
To exit the "Setup" mode, double click the "Middle" button.
Setup and Firmware update
It is possible to configure and update the firmware of your Midland BTX2 PRO using
the USB connection to your PC. On the Midland web site www.midlandeurope.com
in the Midland BTX2 PRO page you can find the PC software and the new firmware
updates if available. ATTENTION DO NOT CONNNECT THE UNIT TO THE PC
BEFORE you DOWNLOAD AND INSTALL THE SOFTWARE.
14
All manuals and user guides at all-guides.com
Use at your own risk
The use of the device will impair your ability to hear other sounds and others around you.
Listening to music or speaking on a telephone may prevent you from hearing others
around you and distract you from riding safely. The use of such device while riding may
endanger you and others, and its use, in some areas, could not be allowed.
Using this device at a high volume may result in permanent hearing loss.
If you experience ringing in your ear or any other hearing related pain, reduce the volu-
me or discontinue using this device. With continued use at high volume, your ears may
become accustomed to the sound level, which may result in permanent damage to your
hearing. Please use this device at a safe volume level.
www.midlandeurope.com