Sanus OLF24-B2 Manual De Instrucciones página 24

TV LATERAL SHIFT
CAUTION:
Avoid potential injury or property damage!
DO NOT adjust the arm from the center postion for concrete
applications. The base of the arm
the wall plate for concrete applications!
08
For wood stud applications:
1. Remove the TV from the arm assembly
2. Remove the cover plates
washers from wall plate
14
3. Reposition the arm assembly
4. Reattach the four screws
3.1) and replace the cover plates
5. Hang the TV onto the arm assembly
24
MUST remain centered in
12
(see PAGE 25).
12
and the four screws
19 13
using hex key .
08 18
on the wall plate.
12
and washers (see STEP
13 14
(see STEP 3.4).
19
following STEP 3.2.
12
19
18
08
and
19
13
14
12