Tips For Choosing Coffee; Hot Water - Philips saeco HD8323/38 Instrucciones De Uso

6

TIPS FOR CHOOSING COFFEE

As a general rule, any type of coff ee available on the market
can be used. However, coff ee is a natural product and its fl a-
vour changes according to its origin and blend; it is therefore
a good idea to try diff erent types of coff ee in order to fi nd the
most suited to your personal taste.
For optimal results, we recommend using espresso machine
blends. As a rule, coff ee should always come out of the pres-
surized fi lter holder, without dripping.
The coff ee brewing speed can be modifi ed by slightly chang-
ing the amount of coff ee in the fi lter and/or using a diff erent
coff ee grind.
BEFORE PERFORMING ANY OPERATIONS RELATED
TO HOT WATER/STEAM DISPENSING, MAKE SURE
THAT THE STEAM WAND IS DIRECTED OVER THE DRIP TRAY.
7

HOT WATER

Danger of burns! Dispensing may be preceded
by small jets of hot water. The steam wand
may reach high temperatures: never touch it with bare
hands.
• During this operation, the "machine ready" light (18) may
fl ash; this is to be considered as a standard and not a faulty
operating mode.
• Before using the machine, make sure that the hot water/
steam knob (3) is closed and that there is enough water in
the machine tank.
• Press the ON/OFF button (11); the green light (16) will turn
on to indicate that the machine is on.
• Wait until the "machine ready" light (18) turns on. The ma-
chine is now ready.
• (Fig.18) - Place a container or a tea glass under the steam
wand.
• (Fig.18) - Open the knob (3) by turning it counter-clock-
wise.
• (Fig.19) - Set the selection knob (15) to the "
• (Fig.20) - When the desired quantity of hot water has
been dispensed, set the selection knob (15) to the " " po-
sition.
• (Fig.21) - Close the knob (3) by turning it clockwise.
• Remove the hot water container.
• 18 •
8 STEAM / CAPPUCCINO
Danger of burns! Dispensing may be preceded
by small jets of hot water. The steam wand may
reach high temperatures: never touch it with bare
hands.
Warning! Never brew coffee when the steam
function is on, as the temperature is too high
and there is a risk of burns.
Warning! During coff ee brewing, do not remove
the filter holder (if inserted) by manually
turning it clockwise. Danger of burns! The fi lter holder
can only be disconnected after bringing the selection
knob (15) back to the " " position and cooling the
machine down as described in section 4.5.
• During this operation, the "machine ready" light (18) may
fl ash; this is to be considered as a standard and not a faulty
operating mode.
• Before using the machine, make sure that the hot water/
steam knob (3) is closed and that there is enough water in
the machine tank.
• Press the ON/OFF button (11); the light (16) will turn on to
indicate that the machine is on.
• Wait until the "machine ready" light (18) turns on.
• (Fig.22) - Set the selection knob (15) to the " " position.
The light (18) turns off .
• Wait until the light (17) turns on. The machine is now ready
for steam dispensing.
• (Fig.23) - Place a container under the steam wand.
• (Fig.23) - Open the knob (3) for a few seconds, so that re-
maining water fl ows out of the steam wand.
In a short time only steam will come out.
• (Fig.24) - Close the knob (3) and remove the container.
• Fill 1/3 of the container - the one you wish to use to prepare
the cappuccino - with cold milk.
Use cold milk to get a better result.
" position.
• (Fig.25) - Immerse the steam wand in the milk and open
the knob (3) by turning it counter-clockwise. Turn the milk
container with slow upward movements so that it warms
up evenly.
It is recommended that the dispensing process
lasts max. 60 seconds.
• (Fig.26) - Once fi nished, close the knob (3) by turning it
clockwise and remove the cup with frothed milk.
• (Fig.27) - Set the selection knob (15) to the " " position.
If both " " and " " lights are on, the temperature of