Your Unit And Its Parts - Quickie XTENDER Manual De Instrucciones

ENGLISH
11
10
9
Unit Weight
Approximately 18.5Kg (Ni) or 19.2kg (Li)
Adjustments
F ront seat height must be greater than the rear.
Tire size
Std– 22" and 24"
Color
Competition Silver
Power Assist Unit
Model Type - Direct current Brush-type motor
Rated Voltage - 24V
Rated Output -90 Wx2 (Left Wheel x 1, and Right Wheel x 1)
Travel distance after a single charge
Approximately 15Km (9.3 miles)
(F or continuous travel on a level surface at 5km/h)
Hand rims
Std– Plastic coated or Stainless Steel
Range of assisted speeds
0-6 Km/h
Control
Microcomputer control
MK-100156 Rev. B
1
7
6
8
5
QUICKIE XTENDER SPECIFICATIONS
4
1. Power Switch
QUICKIE XTENDER
2. Xtender power drive
3. Quick-release handle
2
4. Battery pack
5. Connector (Battery to Power
3
6. High capacity battery
7. Battery removal button
8. Protective battery cover
9. 110V Power cord for charger
10. Charging unit
4
11. Xtender Wheel
12.
NOTE: All features may not be available with
some chair setups or in conjunction with anoth-
er chair feature. Please consult your authorized
dealer for information.
NOTE - The Quickie Xtender is designed to fit
on a variety of Quickie wheelchairs. Each chair
has a different axle plate system that is designed
to accept the Quickie Xtender quick-release
wheels. For information concerning a specific
chair, or axle plate system, please contact
Sunrise Medical customer service, or consult
the owner's manual for that chair.
Drive
Belt + Gear type (rear wheel direct drive)
Steering
Right and left hand-rim steering.
Braking
Brake assist + manual wheelchair brake
Battery
Model type - Nickel-Hydrogen battery (F ast charging type)
Nominal Voltage - Two 1.2 Volt x 20-cell batteries connected in series,
24V
Nominal Capacity - 6.7 Ah (5-hour ratio).
Weight - 2.9Kg (6.4lbs)
Charger
Model type - JWC-2
Input Voltage - AC 100 ~240V, multi-input.
Input frequency - 50/60 Hz
Charging current - F ast 2.6 A trickle 100mA
Cooling Method - F orced air cool
Range of Temperature at start of Charging - 0 to 40°C (Battery
Temp) Charging time - 2.5 to 3.0H
Over current Interception
30A blade-type micro fuse
III. YOUR UNIT AND ITS PARTS
drive)
Hardware (not shown)