EdilKamin BERING Manual Del Usuario página 42

STEP 1
D
F
*
STEP 3
Y
*
STEP 5
D
STEP 7
D
INSTALLATION
STEP 2
A
E
D
STEP 4
G
E
STEP 6
STEP 8
- 42
-
OUTSIDE WALL INSTAL-
LATION OF DOMOKLIMA
GRAPHICA CONSOLE
STEP 1
Bring the wire (*) coming from the boiler
to the point where you wish to position the
(F) near the wire coming from the boiler.
Mark the points on the wall where the
(F).
base (F) with the 2 screws (make the wire
coming from the wall coincide with the
STEP 2
Position the control panel with
display (A) into the seat of the plastic cas-
ing (E).
(N.B. the side with the keys must be posi-
tioned towards the hold in the central part
of the plastic casing).
Press until correctly inserted
STEP 3
Connect the wire to the connector (Y)
positioned on the rear part of the control
panel with display (N.B. take care to cor-
rectly position the connector)
STEP 4
Position the protective plastic cover (G)
tention to the electrical connections.
STEP 5
Fix the protective plastic
cover with 2 self-threading screws pro-
vided (D) (only on the side towards the
opening for the wires).
STEP 6
Apply the plastic casing (E) complete with
already screwed to the wall and click it
into place.
STEP 7
Apply the self-threading screw provided
ing (E) with control panel to the base at
the wall (F).
STEP 8
The control panel thus installed is ready
for use
-
-
-