EdilKamin BERING Manual Del Usuario página 43

Fig. 1
Fig. 2
N
M
A
B
E
INSTALLATION
Fig. 3
B
C
D
ADAPTATION FOR PELLET LOADING
SCREW SYSTEM (optional)
The boiler is designed for pellet loading by means of a screw
feeding system.
ATTENTION: the boiler must be positioned at least 30 cm
from the wall behind it
N.B.:
before starting, turn the boiler off and disconnect the elec-
tricity supply wire.
Figs. 1 - 2
Fig 3
ADAPTATION FOR PNEUMATIC PELLET
LOADING SYSTEM (optional)
The boiler is designed for pellet loading by means of a pneu-
matic feeding system.
The user must activate loading manually.
ATTENTION: the boiler must be positioned at least 12 cm
from the wall behind it
N.B.:
before starting, turn the boiler off and disconnect the elec-
tricity supply wire.
Fig. 4 - 5:
Remove the steel cover (A) by dismantling the two hinges (B)
and the compass type rod (C).
Fig. 6:
Fig. 7:
(D) (see system technical diagram).
- 43
-
-
.
F