EdilKamin BERING Manual Del Usuario página 51

Press the
key repeatedly to return to the HOME screen.
Duration of display brightness
play brightness returns to that of stand-by mode.
Adjust this setting with the + and - keys.
" B A C K L I G H T
D U R A T A
R E T R O I L L . =
D U R A T I O N " = 3 0
ESC
Press the
key repeatedly to return to the HOME screen.
Correcting the temperature measurement
The internal temperature sensor is carefully calibrated and ac-
curately checked in the factory.
allow for correct and precise measurement of the environmental
console can be re-calibrated.
Change the set value with the + and - keys
" T E M P R E A D I N G
C O R R E Z I O N E
M I S U R A
C O R R E C T I O N " = 0 . 0 °
0 . 0 °
ESC
Press the
key repeatedly to return to the HOME screen.
Firmware version (fw) only for technical assistance centre
V E R S I O N F W = X . X
V E R S I O N E
X . X
ESC
INSTRUCTIONS FOR USE
3 0
T E M P . =
F W =
Technical menu
This menu is exclusively for use by the technical assistance
centre.
REMOTE CONTROL OF THE BOILER
-
The second line shows the SET temperature of the output water
set by the user.
The third line shows the working power automatically chosen
by the boiler.
Switching the boiler on and off
To switch the boiler on/off, proceed as follows: from the HOME
screen press any key and then the menu key, select BOILER
C O N S O L E
B O I L E R
C A L D A I A
ESC
Go to the BOILER STATUS screen, press the ON key to switch
it on or the OFF key to switch it off.
B O I L E R S T A T U S
S T A T O
S T A N D - B Y
S T A N D - B Y
ESC
- 51
-
.
C A L D A I A
ON
=
OFF