GE IM-4 Manual Del Usuario página 31

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALL THE ICEMAKER FILL
6
CUP AND INSERT
Install the icemaker fill cup (center-mounted)(19)
and icemaker insert(20) into the icemaker as shown.
19
7
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the power
cord plug into the socket, making sure that the
prongs and holes are matched. Press the plug firmly
into the socket. Lock the plug in place by clipping
the restraints onto each side of the plug. Make sure
the restraints click into place.
MOUNT THE ICEMAKER
8
• Lift the icemaker up and hang it on the icemaker
bracket (25). Make sure the fill tube (16) goes into
the fill cup opening (19). To secure the icemaker to
the bracket (25), use two screws (17) and install as
shown.
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup
opening at the back of the icemaker. (Check the
rear of the refrigerator to make sure that the fill
tube has not pushed out the back of the
refrigerator).
• The icemaker is
25
secured to the
bracket.
All manuals and user guides at all-guides.com
Installation Instructions
20
16
17
19
31
9
INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
11
10
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
11
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Installing the Water
Valve Assembly section.

Publicidad

Tabla de contenido
loading

Tabla de contenido