GE IM-4 Manual Del Usuario página 8

REMOVE EXISTING ICE TRAY HOLDER
Follow the instructions below for the ice tray holder that looks like yours.
Type 1
• Unhook the ice tray holder side and bottom from the
retaining hooks. Lower the holder until the side is
clear of the freezer shelf and remove it from the
freezer. You will not need this part.
Type 2
• As you lift the tab on the left side in the holder with
the blade of a screwdriver, pull the holder forward
and out. You will not need this part.
Type 3
• When following Instructions G, it is not necessary
to remove the ice tray shelf or, on some models,
the wire shelf next to it.
• Tilt the ice tray shelf and remove it. You will not
need this part.
All manuals and user guides at all-guides.com
Installation Instructions
Retaining hooks
Do not
lift here
Lift this
tab out
• Remove the 2 screws and save them for installation
of the icemaker.
• Lift the ice tray holder off the plastic hook. You will
not need this part.
Screws
Plastic hook
• Remove the screw with a 1/4" nutdriver.
• Pull the ice tray shelf away from the wall. Remove
the shelf. You will not need this part.
• Replace the screw.
8
Type 4
Type 5
Screw