GE IM-4 Manual Del Usuario página 39

5
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted)(18)
into the icemaker as shown.
POWER CORD ADAPTER
6
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List on
page 7. Plug the female end of the power cord adapter
(22) onto the male terminals on the icemaker power
cord. When connecting the adapter to the power cord,
make sure the seal is in place between the connectors.
Secure the power cord adapter to the icemaker by
putting it into the hook at the back of the icemaker
and attaching it to the icemaker with a wire tie (24).
Hook
7 PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in place
by clipping the restraints onto each side of the plug.
Make sure the restraints click into place.
All manuals and user guides at all-guides.com
Installation Instructions
18
22
Seal
Wire tie
Hook
8 MOUNT THE ICEMAKER
• Lift the icemaker so the fill tube (16) fits in the
fill cup opening (D). Hang the icemaker on the
two screws.
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup
opening at the back of the icemaker. (Check the
rear of the refrigerator to make sure the fill tube
has not been pushed out of the back of the
refrigerator).
• The icemaker mounting screws are located in the
uppermost position of the mounting slots.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
9 INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is in the
OFF position.
10 ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
11 KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
39
16
D
11