Choosing An Installation Site; Indoor Unit; Wireless Remote Controller - McQuay K Serie Manual De Instalación

01_EN_3P257187-1A.fm Page 2 Thursday, November 12, 2009 12:01 PM
Accessories
– ,

Indoor unit

A K
Mounting plate
A
Mounting plate fixing screw
B
(M4 × 25L)
Titanium apatite photocatalytic
C
air-purifying filter

Wireless remote controller

D

Choosing an Installation Site

• Before choosing the installation site, obtain user approval.
1.
Indoor unit
• The indoor unit should be sited in a place where:
1) the restrictions on installation specified in the indoor unit installation drawings are met,
2) both air inlet and air outlet have clear paths met,
3) the unit is not in the path of direct sunlight,
4) the unit is away from the source of heat or steam,
5) there is no source of machine oil vapour (this may shorten indoor unit life),
6) cool (warm) air is circulated throughout the room,
7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten the
remote controller range,
8) the unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound),
9) install at the recommended height (1.8m),
10) no laundry equipment is located.
2.
Wireless remote controller
• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properly received
by the indoor unit (within 7m).
2
All manuals and user guides at all-guides.com
1
Remote controller holder
E
Fixing screw for remote
F
6
controller holder (M3 × 20L)
Dry battery AAA. LR03
G
2
(alkaline)
Indoor unit fixing screw
H
1
(M4 × 12L)
1
Operation manual
J
2
Installation manual
K
2
2
■English
1
1