Kohler K-6330 Instrucciones De Montaje página 6

Channel
Angle
Square-Head
Bracket
Bolt
5. Angle Bracket Installation
Install the angle bracket to the bottom of the channel with the
square-head bolt, washer and hex nut.
Hand tighten the hex nut. Do not tighten with a wrench at this
time.
When installing faucet with a stainless steel sink:
Use a level to make sure that the spout is plumb.
Position the channel as needed.
When installing faucet to any other sink:
Adjust the height of the angle bracket so that it rests on the
cabinet floor.
Secure the angle bracket to the cabinet floor with two screws
suitable for the material.
Securely tighten the angle bracket hex nut with a wrench.
1025493-2-B
Hex Nut
Washer
Channel
6
Hex Nut
Screws
Cabinet
Floor
Kohler Co.