Using Your Iron - Hamilton Beach 14670R Manual Del Usuario

All manuals and user guides at all-guides.com
840205900 ENv02.qxd:840131800 ENv01.qxd

Using Your Iron

To Dry Iron
1. Plug iron into outlet.
2. Turn Adjustable Steam Switch to Dry
Iron .
To Steam Iron
1. Unplug iron. Turn Adjustable Steam
Switch to Dry Iron
upright on heel rest.
2. Using a cup, slowly pour tap water
into water tank opening until MAX fill
line has been reached. Do not fill iron
directly from the faucet.
3. Plug iron into outlet.
4. Turn the Temperature Control Dial
to desired fabric setting in the steam
range.
WARNING! Burn Hazard: Attempting
to steam iron on a lower temperature
setting or failing to allow the iron to
reach selected temperature can
result in hot water dripping from the
soleplate.
5. Allow 2 minutes for the iron to reach
desired temperature.
4
10/28/11
3. Turn Temperature Control Dial
to desired temperature. Allow 2
minutes for iron to reach desired
temperature.
4. To turn iron OFF (O), turn
Temperature Control Dial to OFF (O)
and unplug iron.
6. Set Adjustable Steam Switch to the
. Set iron
recommended steam level. See the
"Fabric Setting Chart."
7. To turn iron off, set Adjustable
Steam Switch to Dry Iron
the Temperature Control Dial to OFF
(O). Unplug iron.
8. Empty water from the iron following
directions in "Caring for Your Iron."
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
11:22 AM Page 4
. Turn