Power Supply - Metz mecalight LED-160 Manual De Instrucciones

Power supply

mecalight LED-160 (2x),
mecalight LED-320 (4x)
• nickel-metal-hydride rechargeable batteries
1.2 V, type IEC HR03 (AAA / Micro).
• alkaline-manganese dry batteries
1.5 V, type IEC LR03 (AAA / Micro).
mecalight LED-480 (4 x):
• nickel-metal-hydride rechargeable batteries
1.2 V, type IEC HR6 (AA / mignon).
• alkaline-manganese dry batteries
1.5 V, type IEC LR6 (AA / mignon).
The mecalight lights mecalight LED-320 and
mecalight LED-480 can also be operated with
a 4.8 – 9V power supply.
Attention -polarity
Please only use the power sources given
above. If other power sources are used, there
is a risk of damaging the light unit.
If your light unit is not going to be used for
an extended period of time, remove the
batteries.
All manuals and user guides at all-guides.com
When inserting batteries, ensure that the
polarity is correct and matches the symbols
in the battery compartment. Inserting the
batteries in the wrong direction can destroy
the flash unit!
Always replace all batteries simultaneously,
and make sure that batteries are the same
brand and have the same capacity. Flat or
dead batteries should not be disposed of with
ordinary household waste. Help protect the
environment, and dispose of flat/dead
batteries at the appropriate collection points.
None of the types of power supplies are
included in the delivery.
+
When the voltage of the power source is
too low, the mecalight begins to blink.
k
25