Hach 9525sc Degas System Manual Del Usuario página 3

Section 1 Table of contents
Specifications on page 3
General information on page 4
Installation on page 8
Startup on page 14
Section 2 Specifications
Specifications are subject to change without notice.
Specification
Dimensions, 9525 Degas System (W x H x D)
Dimensions, 9525 DCCP System (W x H x D) (Optional)
Weight
Power requirements
Main supply voltage fluctuation
Power consumption
Pollution Degree
Installation Category
Altitude Requirements
Recommended operating temperature
Ambient temperature range
Storage temperature
Relative humidity
8315 Conductivity sensor
sc200/9500 Controller power requirements
Controller enclosure rating
Sample flow
Sample inlet/outlet connections
Cooling water consumption
Degas system certifications
Operation on page 16
Maintenance on page 19
Troubleshooting on page 28
Replacement parts and accessories
Details
559 x 813 x 305 mm (22 x 32 x 12 in.)
826 x 813 x 241 mm (32.5 x 32 x 9.5 in.)
36 kg (80 lb)
US: 110 to 120 VAC, 1 phase, 50/60 Hz
EU: 220 to 240 VAC, 1 phase, 50/60 Hz
±10% of nominal voltage
1.6 kVA
2
II
Standard 2000 m (6,562 ft.)
23 to 27 °C (75 to 80 °F)
2 to 50 °C (36 to 122 °F)
0 to 49 °C (32 to 120 °F)
0% to 85% RH
Cell constant, k: 0.01 cm
Measuring range: 0.01 to 200 μS/cm
Sensor accuracy: <2%
100 to 240 VAC ±10%, 50/60 Hz
IP66/NEMA 4X
100 to 150 mL/min; 6 to 9 L/hr (1.5 to 2.4 gph)
1/4 in. tube fitting
3.8 to 11.4 L/min (1 to 3 gpm)
CE, UL, CSA
on page 28
-1
English 3