Bosch VCM9736/10T Manual De Instrucciones página 8

VCM9736/10T & VC973650T | Installation Instructions
Surface mount using an electrical box
• Install a single-gang electrical box (not supplied) at the desired
location.
• Attach the mounting plate to the single-gang box with
appropriate screws.
• Pass the cable through the mounting plate and connect it to the
camera unit.
• Click the camera unit onto the mounting plate.
• Lock the mounting plate to the PIR camera unit by turning the
lock screw.
Bosch Security Systems | 2003-09 | Version 1
All manuals and user guides at all-guides.com
EN | 6
Mounting plate