Removing The Protective Suit - MSA Vautex Elite ET Trainer Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
MSA
3.4.

Removing the Protective Suit

When removing the protective suit, avoid any contact with the soiled outside of the suit. To
avoid any impurities from reaching the inside the assistant must ensure that he does not come
into contact with them.
The preliminary cleaning is, if necessary, performed using water with suitable detergent
additives with the zip cover open.
The removal of the protective suit is performed in reverse order from the donning procedure:
(1) Open the zip cover.
(2) Pull your arms from the sleeves and hold on to the lens from the inside.
(3) Open the protective suit carefully.
Attention!
Carefully open the zip by pulling gently.
As the zip slider moves downwards, hold on to the suit material at the same level.
Opening with excessive force can cause long-term damage.
(4) Pull the protective suit off.
(5) Remove the compressed air breathing apparatus.
(6) For storage of the suit, e.g. loosely fold the suit and pack into a polythene bag or similar.
GB
Vautex Elite ET Trainer
USE
11

Publicidad

Tabla de contenido
loading

Tabla de contenido